Generic 6.3v Flipper Strip

The generic 6.3 flipper strip installs like our other flipper strips. But the power is provided by the general illumination. These strips can work on any game, so the installation instructions are fairly generic.

1) Remove the apron or feed the strip through the apron if you can reach it through without removing it.

2) Attach the strip to the apron like shown:

3) Keep the strip high so ball cant hit it. Here is a shot from playfield view pointing at under the apron:

4) Run the wires under the playfield and clip onto the nearest GI. The strip is likely polarized so if it doesn't power up one way, swap the red and black leads and try again.